org.opengis.referencing.datum

Class VerticalDatumType

Object

CodeList<VerticalDatumType>

VerticalDatumType

All Implemented Interfaces:

Serializable, Comparable<VerticalDatumType>

@UML(identifier="CD_VerticalDatumType",
     specification=ISO_19111)
public final class VerticalDatumType
extends CodeList<VerticalDatumType>

Type of a vertical datum.

Since:

GeoAPI 1.0

Author:

Martin Desruisseaux (IRD)

See Also:

Serialized Form

Field Summary

Fields

Modifier and Type	Field and Description
static VerticalDatumType	BAROMETRIC Atmospheric pressure is the basis for the definition of the origin of the associated vertical coordinate system axis.
static VerticalDatumType	DEPTH The zero point of the vertical axis is defined by a surface that has meaning for the purpose which the associated vertical measurements are used for.
static VerticalDatumType	ELLIPSOIDAL A vertical datum for ellipsoidal heights that are measured along the normal to the ellipsoid used in the definition of horizontal datum.
static VerticalDatumType	GEOIDAL The zero value of the associated vertical coordinate system axis is defined to approximate a constant potential surface, usually the geoid.
static VerticalDatumType	ORTHOMETRIC A vertical datum for orthometric heights that are measured along the plumb line.
static VerticalDatumType	OTHER_SURFACE In some cases, e.g. oil exploration and production, a geological feature, such as the top or bottom of a geologically identifiable and meaningful subsurface layer, is used as a vertical datum.

Method Summary

Modifier and Type	Method and Description
VerticalDatumType[]	family() Returns the list of enumerations of the same kind than this enum.
static VerticalDatumType	valueOf(String code) Returns the vertical datum type that matches the given string, or returns a new one if none match it.
static VerticalDatumType[]	values() Returns the list of VerticalDatumTypes.

Methods inherited from class CodeList

compareTo, equals, identifier, matches, name, ordinal, readResolve, toString, valueOf

Methods inherited from class Object

clone, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Detail

OTHER_SURFACE

@UML(identifier="other surface",
     obligation=CONDITIONAL,
     specification=ISO_19111)
public static final VerticalDatumType OTHER_SURFACE

In some cases, e.g. oil exploration and production, a geological feature, such as the top or bottom of a geologically identifiable and meaningful subsurface layer, is used as a vertical datum. Other variations to the above three vertical datum types may exist and are all included in this type.

GEOIDAL

@UML(identifier="geoidal",
     obligation=CONDITIONAL,
     specification=ISO_19111)
public static final VerticalDatumType GEOIDAL

The zero value of the associated vertical coordinate system axis is defined to approximate a constant potential surface, usually the geoid. Such a reference surface is usually determined by a national or scientific authority, and is then a well-known, named datum.

ELLIPSOIDAL

@UML(identifier="CS_DatumType.CS_VD_Ellipsoidal",
     obligation=CONDITIONAL,
     specification=OGC_01009)
public static final VerticalDatumType ELLIPSOIDAL

A vertical datum for ellipsoidal heights that are measured along the normal to the ellipsoid used in the definition of horizontal datum.

DEPTH

@UML(identifier="depth",
     obligation=CONDITIONAL,
     specification=ISO_19111)
public static final VerticalDatumType DEPTH

The zero point of the vertical axis is defined by a surface that has meaning for the purpose which the associated vertical measurements are used for. For hydrographic charts, this is often a predicted nominal sea surface (i.e., without waves or other wind and current effects) that occurs at low tide. Depths are measured in the direction perpendicular (approximately) to the actual equipotential surfaces of the earth's gravity field, using such procedures as echo-sounding.

BAROMETRIC

@UML(identifier="barometric",
     obligation=CONDITIONAL,
     specification=ISO_19111)
public static final VerticalDatumType BAROMETRIC

Atmospheric pressure is the basis for the definition of the origin of the associated vertical coordinate system axis. These are approximations of orthometric heights obtained with the help of a barometer or a barometric altimeter. These values are usually expressed in one of the following units: meters, feet, millibars (used to measure pressure levels), or theta value (units used to measure geopotential height).

ORTHOMETRIC

@UML(identifier="CS_DatumType.CS_VD_Orthometric",
     obligation=CONDITIONAL,
     specification=OGC_01009)
public static final VerticalDatumType ORTHOMETRIC

A vertical datum for orthometric heights that are measured along the plumb line.

Method Detail

values

public static VerticalDatumType[] values()

Returns the list of VerticalDatumTypes.

Returns:

The list of codes declared in the current JVM.

family

public VerticalDatumType[] family()

Returns the list of enumerations of the same kind than this enum.

Specified by:

family in class CodeList<VerticalDatumType>

Returns:

The codes of the same kind than this code.

valueOf

public static VerticalDatumType valueOf(String code)

Returns the vertical datum type that matches the given string, or returns a new one if none match it.

Parameters:

code - The name of the code to fetch or to create.

Returns:

A code matching the given name.